ubuntu 8.04.1 LTS 下的cpu温度监控软件lm-sensors
<p>安装环境：</p>
<p>
ubuntu 8.04.1 LTS</p>
<p>
安装步骤：</p>
<p>
1.安装lm-sensors</p>
<p>
# apt-get install lm-sensors</p>
<p>
2.设定监控选项</p>
<p>
# sensors-detect</p>
<p>
通常都是回答yes即可，注意最后一项，例如下面的资讯</p>
<p>
To load everything that is needed, add this to /etc/modules:</p>
<p>
#----cut here----</p>
<p>
# I2C adapter drivers</p>
<p>
# modprobe unknown adapter NVIDIA i2c adapter</p>
<p>
# modprobe unknown adapter NVIDIA i2c adapter</p>
<p>
# modprobe unknown adapter NVIDIA i2c adapter</p>
<p>
i2c-i801</p>
<p>
# Chip drivers</p>
<p>
# no driver for Winbond W83L785R/G yet</p>
<p>
lm85</p>
<p>
#----cut here----</p>
<p>
3.出现如上讯息后，载入模组</p>
<p>
例如我的是i2c-i801与lm85</p>
<p>
# modprobe i2c-i801</p>
<p>
# modprobe lm85</p>
<p>
4.之后再输入：</p>
<p>
# sensors</p>
<p>
5.就会出现cpu温度之类的监控讯息。</p>
<p>
adm1027-i2c-3-2e</p>
<p>
Adapter: SMBus I801 adapter at e000</p>
<p>
V1.5: +1.31 V (min = +0.00 V, max = +3.32 V)</p>
<p>
VCore: +1.49 V (min = +0.00 V, max = +2.99 V)</p>
<p>
V3.3: +3.30 V (min = +0.00 V, max = +4.38 V)</p>
<p>
V5: +5.08 V (min = +0.00 V, max = +6.64 V)</p>
<p>
V12: +11.97 V (min = +0.00 V, max = +15.94 V) ALARM</p>
<p>
CPU_Fan: 3941 RPM (min = 0 RPM)</p>
<p>
fan2: 0 RPM (min = 0 RPM)</p>
<p>
fan3: 0 RPM (min = 0 RPM)</p>
<p>
fan4: 1882 RPM (min = 0 RPM)</p>
<p>
CPU Temp: +48.8°C (low = -127.0°C, high = +127.0°C)</p>
<p>
Board Temp: +46.0°C (low = -127.0°C, high = +127.0°C)</p>
<p>
Remote Temp: +45.5°C (low = -127.0°C, high = +127.0°C)</p>
<p>
cpu0_vid: +1.525 V</p>
頁:
[1]